Jaili Machinery Co., Ltd.
Not only products but also a fine quality of helping with utmost attention.
Add to Cart
| High quality 1 Ton 220V-690V Electric Chain Hoist with hook |
| 1) Compact and high efficient motor, low power consumption |
| 2) Hoist body pressing steel structure, high strength body, light and compact |
| 3) Most tensile safety hooks: Both the top and bottom hooks are made of high tensile alloy steel with special treatment; It guarantees the hook will not break and deform gradually under a sudden extra-load |
| 4) Compact and beauty chain container: High strength plastic container has outstanding durability |
| 5) Limit switch devices fitted at both top and bottom ends: Switch off power automatically to prevent load chain from running out |
* Break System:
1. Side Magnetic Braking Device, Ensure lock the hoist
2. Mechanical braker, Dual braking system, much more safety.
* Limit Switch:
With up & down Limit Switch, to prohibit the chains from exceeding for safety.
* Chain:
G80 Chain, Origina imported from Japan. Anti-Rust and Anti-corrosion
* Electromagnetic contactor:
1. With Schneider Electric (TESSIC), can be used safely under high frequency.
2. Can be installed Variable-Vrequency Drive (VFD Electric) Can be suitable for Singlle Phase Power supply.
* Inverse phase sequence protecting device:
It is sepcial electrical installation which controls the circuit not to work in case of wiring error in the power supply.
* Gear:
The gear made of alloy steel, Through the heat treatment.
* Level of Protection Grade(IP Grade):
1. Hoist IP Grade: IP54
2. Push Buttom IP Grade: IP65
| 1t Electric Chain Hoist With Electric Trolley | |||||
| Type | 0.5-01 | 01-01 | 02-01 | 03-02 | |
| Capacity(t) | 0.5 | 1 | 2 | 3 | |
| Standard Lifting Height(m) | 3 | 3 | 3 | 3 | |
| Lifting Speed(m/min) | 6.8 | 6.6 | 6.6 | 4.4 | |
| Lifting Motor | Power(kw) | 0.75 | 1.5 | 3 | 3 |
| Rotation Speed(r/min) | 1440 | 1440 | 1440 | 1440 | |
| Phases | 3 | 3 | 3 | 3 | |
| Voltage(v) | 200-660 | 200-660 | 200-660 | 200-660 | |
| Frequency(Hz) | 50/60 | 50/60 | 50/60 | 50/60 | |
| Operating Motor | Power(kw) | 0.4 | 0.4 | 0.4 | 0.75 |
| Rotation Speed(r/min) | 1440 | 1440 | 1440 | 1440 | |
| Operating Speed(m/min) | 11/21 | 11/21 | 11/21 | 11/21 | |
| Phases | 3 | 3 | 3 | 3 | |
| Volatge(v) | 200-660 | 200-660 | 200-660 | 200-660 | |
| Frequency(Hz) | 50/60 | 50/60 | 50/60 | 50/60 | |
| Chain Turns | 1 | 1 | 1 | 1 | |
| Chain Specification | Ø6.3 | Ø7.1 | Ø10.0 | Ø10.0 | |
| Test Load(t) | 0.625 | 1.25 | 2.5 | 3.75 | |
| Weight(kg) | 47 | 61 | 115 | 122 | |
| I-Beam(mm) | 58-153 | 58-153 | 82-178 | 100-178 | |
| Weight Added with 1m Higher(kg) | 0.81 | 1.1 | 2.3 | 2.8 | |
