Jaili Machinery Co., Ltd.
Not only products but also a fine quality of helping with utmost attention.
Add to Cart
TXK Brand Single Speed 1Ton Electric Trolley Chain Hoist With CE Certificate
Product Description
TXK chain hoist spare parts is almost all was produced by ourselves.Compared with other chinese suppliers,TXK brand electric chain hoist with below features:
1. All aluminum die-cast body,the weight is lighter .
2. Motor with cooling fan which make the hoist with longer life .
3. Motor protection : with overheating limiter
4. Brake system:side magnetic brake system / electronic magnetic brake .
5. Safety clutch for overload protection .
6. Inverter is optional .
7. Limit switch for upper and lower lifting .
8. Eaton / Schneider contactor .
9. G80/G100/Japan load chain ,even if the galvanized chain is ok
* Break System:
1. Side Magnetic Braking Device, Ensure lock the hoist
2. Mechanical braker, Dual braking system, much more safety.
* Limit Switch:
With up & down Limit Switch, to prohibit the chains from exceeding for safety.
* Chain:
G80 Chain, Origina imported from Japan. Anti-Rust and Anti-corrosion
* Electromagnetic contactor:
1. With Schneider Electric (TESSIC), can be used safely under high frequency.
2. Can be installed Variable-Vrequency Drive (VFD Electric) Can be suitable for Singlle Phase Power supply.
* Inverse phase sequence protecting device:
It is sepcial electrical installation which controls the circuit not to work in case of wiring error in the power supply.
* Gear:
The gear made of alloy steel, Through the heat treatment.
* Level of Protection Grade(IP Grade):
1. Hoist IP Grade: IP54
2. Push Buttom IP Grade: IP65
| Electric Chain Hoist With Electric Trolley | |||||
| Type | 0.5-01 | 01-01 | 02-01 | 03-02 | |
| Capacity(t) | 0.5 | 1 | 2 | 3 | |
| Standard Lifting Height(m) | 3 | 3 | 3 | 3 | |
| Lifting Speed(m/min) | 6.8 | 6.6 | 6.6 | 4.4 | |
| Lifting Motor | Power(kw) | 0.75 | 1.5 | 3 | 3 |
| Rotation Speed(r/min) | 1440 | 1440 | 1440 | 1440 | |
| Phases | 3 | 3 | 3 | 3 | |
| Voltage(v) | 200-660 | 200-660 | 200-660 | 200-660 | |
| Frequency(Hz) | 50/60 | 50/60 | 50/60 | 50/60 | |
| Operating Motor | Power(kw) | 0.4 | 0.4 | 0.4 | 0.75 |
| Rotation Speed(r/min) | 1440 | 1440 | 1440 | 1440 | |
| Operating Speed(m/min) | 11/21 | 11/21 | 11/21 | 11/21 | |
| Phases | 3 | 3 | 3 | 3 | |
| Volatge(v) | 200-660 | 200-660 | 200-660 | 200-660 | |
| Frequency(Hz) | 50/60 | 50/60 | 50/60 | 50/60 | |
| Chain Turns | 1 | 1 | 1 | 1 | |
| Chain Specification | Ø6.3 | Ø7.1 | Ø10.0 | Ø10.0 | |
| Test Load(t) | 0.625 | 1.25 | 2.5 | 3.75 | |
| Weight(kg) | 47 | 61 | 115 | 122 | |
| I-Beam(mm) | 58-153 | 58-153 | 82-178 | 100-178 | |
| Weight Added with 1m Higher(kg) | 0.81 | 1.1 | 2.3 | 2.8 | |